Subscape 10

Subscape 10

The Subscape 10 is a direct-burial, 10” subwoofer to complement Periscape speakers. With 250 watts (RMS) of power handling, it is an ideal companion to Periscape spike-mount speakers. Once installed, the only visible part of the speaker is a discreet, brown vent cap. One Subscape subwoofer is suitable for installations of up to 7 Periscape units; additional subwoofers are recommended for larger installations. The Subscape 10 may also be used with other Rockustics speakers or other outdoor products. A built-in transformer provides convenience for 70V installations; the subwoofer may also be operated in 8 ohm direct mode. When installed in 8 ohm mode, we recommend the use of the PhaseTech P350 subwoofer amp.

Specifications: Subscape 10Mounting hardware included
Nominal Impedance8 Ohm
Impedance (min)8 Ohm
Sensitivity dB @ 2.83V/1M87.0 dB
Sensitivity dB @ 1W/1M (2)87.0 dB
Frequency Response (± 3 dB)32 Hz - 105 Hz
Frequency Response (±10 dB)25 Hz - 150 Hz
Max. Program Power500W
Max. Continuous Power RMS250W
Max. Power SPL @ 1 M111.0 dB
Tap Selector3 sets bare wire leads with optional transformer bypass
Transformer Options70.7 / 100 Volt option with 8 Ohm direct
Transducer - Low Frequency Driver10" Polypropylene Cone w/ Butyl Rubber Surround
ColorsBrown
Height (SM = Height)635 mm / 25"
Owner's Manual - colorDownload Owners Manual